Convert Imperial gills to US quarts
1 imperial gill is 0.15 qt. One imperial gill is exactly 0.150118740688 US quarts.
One imperial gill is 0.15011874 US quarts. To convert imperial gills to US quarts, multiply by 0.15011874; to go the other way, divide by 0.15011874 or multiply by 6.6613935. The relation is exact but the figure is not: it is a rounding of a number that does not terminate, and it follows from NIST Handbook 130. A quarter of an imperial pint, 142.0653125 ml exactly.
Factor checked against the defining standard · How we check
- Imperial gills × 0.15011874
1 * 0.15011870.15 qt
1 imperial gill in every volume unit
| Unit | Value | Exact factor |
|---|---|---|
| US teaspoons | 28.82279821 tsp | × 28.8227982121 |
| US tablespoons | 9.607599404 tbsp | × 9.60759940404 |
| US fluid ounces | 4.803799702 fl oz | × 4.80379970202 |
| US cups | 0.6004749628 cup | × 0.600474962752 |
| US pints | 0.3002374814 pt | × 0.300237481376 |
| US quarts | 0.1501187407 qt | × 0.150118740688 |
| US gallons | 0.03752968517 gal | × 0.037529685172 |
| milliliters | 142.0653125 ml | × 142.0653125 |
| liters | 0.1420653125 L | × 0.1420653125 |
| imperial gallons | 0.03125 gal (UK) | × 0.03125 |
| imperial quarts | 0.125 qt (UK) | × 0.125 |
| imperial pints | 0.25 pt (UK) | × 0.25 |
| imperial fluid ounces | 5 fl oz (UK) | × 5 |
| imperial gills (as entered) | 1 gi (UK) | — |
| cubic millimetres | 142,065.3125 mm³ | × 142,065.3125 |
| cubic centimetres | 142.0653125 cm³ | × 142.0653125 |
| cubic inches | 8.669357275 in³ | × 8.66935727474 |
| cubic feet | 0.005016989164 ft³ | × 0.00501698916362 |
| cubic yards | 0.0001858144135 yd³ | × 0.000185814413467 |
| cubic metres | 0.0001420653125 m³ | × 0.0001420653125 |
Factors are entered by hand from NIST Handbook 130 rather than derived from a units library, so the ones that terminate are exact rather than rounded.
How do you convert imperial gills to US quarts? The converter and the working
- 1.Take the measurement in imperial gills.
- 2.Multiply by 0.15011874 — that is how many US quarts fit in one imperial gill.
- 3.To go back the other way, divide by 0.15011874, or multiply by 6.6613935.
Worked example: 25 imperial gills to US quarts
- Formula
- gi (UK) × 0.15011874 = qt
- Arithmetic
- 25 × 0.15011874 = 3.75 qt
- Answer
- 25 gi (UK) = 3.75 qt
The factor is rounded for display; the figure above is computed from the full value.
Imperial gills to US quarts conversion table
| Imperial gills | US quarts |
|---|---|
| 1 gi (UK) | 0.15 qt |
| 2 gi (UK) | 0.3 qt |
| 3 gi (UK) | 0.45 qt |
| 4 gi (UK) | 0.6 qt |
| 5 gi (UK) | 0.75 qt |
| 6 gi (UK) | 0.9 qt |
| 7 gi (UK) | 1.05 qt |
| 8 gi (UK) | 1.2 qt |
| 9 gi (UK) | 1.35 qt |
| 10 gi (UK) | 1.5 qt |
| 12 gi (UK) | 1.8 qt |
| 15 gi (UK) | 2.25 qt |
| 20 gi (UK) | 3 qt |
| 25 gi (UK) | 3.75 qt |
| 50 gi (UK) | 7.51 qt |
| 100 gi (UK) | 15.01 qt |
| 200 gi (UK) | 30.02 qt |
| 300 gi (UK) | 45.04 qt |
| 500 gi (UK) | 75.06 qt |
| 1000 gi (UK) | 150.12 qt |
| 2000 gi (UK) | 300.24 qt |
| 5000 gi (UK) | 750.59 qt |
| 10000 gi (UK) | 1,501.19 qt |
What is an imperial gill?
A quarter of an imperial pint, 142.0653125 ml exactly. It survives as the measure spirits were once poured by in British pubs, and in old recipes that ask for a gill of cream.
What is a US quart?
Two pints, about 946 ml, and close enough to a liter that recipes swap them.
How many US quarts are in an imperial gill?
One imperial gill is 0.15011874 US quarts. Going the other way, one US quart is 6.6613935 imperial gills. Both figures come from the same defined relation rather than from a measurement, which is why they are the same today as they were in 1959.
Every volume unit here
The whole group — 20 units with their symbols and the size of each one in liters — is on the conversion index, along with every pair it makes. The table above already gives each of them relative to an imperial gill.
Cite this page
- APA
- Rule Calculator. (2026). Convert Imperial gills to US quarts. Rule Calculator. https://rulecalculators.com/convert/imperial-gill-to-quart
- MLA
- "Convert Imperial gills to US quarts." Rule Calculator, August 16, 2026, https://rulecalculators.com/convert/imperial-gill-to-quart.
- Chicago
- Rule Calculator. "Convert Imperial gills to US quarts." Rule Calculator. Last reviewed August 16, 2026. https://rulecalculators.com/convert/imperial-gill-to-quart.
The date is when the figures on this page were last checked against their source, not the day you opened it. Add your own access date if your style needs one.
Questions people actually ask
- How many US quarts are in an imperial gill?
- 0.15011874. Two pints, about 946 ml, and close enough to a liter that recipes swap them.
- How do I convert US quarts back to imperial gills?
- Divide by 0.15011874, or multiply by 6.6613935 — they are the same operation.
Other volume conversions
US quarts to imperial gills — the same conversion the other way.