Convert Imperial gills to Cubic yards
1 imperial gill is 0.0001858 yd³. One imperial gill is exactly 0.000185814413467 cubic yards.
One imperial gill is 1.8581 × 10^-4 cubic yards. To convert imperial gills to cubic yards, multiply by 1.8581 × 10^-4; to go the other way, divide by 1.8581 × 10^-4 or multiply by 5381.7138. The relation is exact but the figure is not: it is a rounding of a number that does not terminate, and it follows from NIST Handbook 130. A quarter of an imperial pint, 142.0653125 ml exactly.
Factor checked against the defining standard · How we check
- Imperial gills × 1.8581 × 10^-4
1 * 0.00018580 yd³
1 imperial gill in every volume unit
| Unit | Value | Exact factor |
|---|---|---|
| US teaspoons | 28.82279821 tsp | × 28.8227982121 |
| US tablespoons | 9.607599404 tbsp | × 9.60759940404 |
| US fluid ounces | 4.803799702 fl oz | × 4.80379970202 |
| US cups | 0.6004749628 cup | × 0.600474962752 |
| US pints | 0.3002374814 pt | × 0.300237481376 |
| US quarts | 0.1501187407 qt | × 0.150118740688 |
| US gallons | 0.03752968517 gal | × 0.037529685172 |
| milliliters | 142.0653125 ml | × 142.0653125 |
| liters | 0.1420653125 L | × 0.1420653125 |
| imperial gallons | 0.03125 gal (UK) | × 0.03125 |
| imperial quarts | 0.125 qt (UK) | × 0.125 |
| imperial pints | 0.25 pt (UK) | × 0.25 |
| imperial fluid ounces | 5 fl oz (UK) | × 5 |
| imperial gills (as entered) | 1 gi (UK) | — |
| cubic millimetres | 142,065.3125 mm³ | × 142,065.3125 |
| cubic centimetres | 142.0653125 cm³ | × 142.0653125 |
| cubic inches | 8.669357275 in³ | × 8.66935727474 |
| cubic feet | 0.005016989164 ft³ | × 0.00501698916362 |
| cubic yards | 0.0001858144135 yd³ | × 0.000185814413467 |
| cubic metres | 0.0001420653125 m³ | × 0.0001420653125 |
Factors are entered by hand from NIST Handbook 130 rather than derived from a units library, so the ones that terminate are exact rather than rounded.
How do you convert imperial gills to cubic yards? The converter and the working
- 1.Take the measurement in imperial gills.
- 2.Multiply by 1.8581 × 10^-4 — that is how many cubic yards fit in one imperial gill.
- 3.To go back the other way, divide by 1.8581 × 10^-4, or multiply by 5381.7138.
Worked example: 25 imperial gills to cubic yards
- Formula
- gi (UK) × 1.8581 × 10^-4 = yd³
- Arithmetic
- 25 × 1.8581 × 10^-4 = 0.004645 yd³
- Answer
- 25 gi (UK) = 0.004645 yd³
The factor is rounded for display; the figure above is computed from the full value.
Imperial gills to cubic yards conversion table
| Imperial gills | Cubic yards |
|---|---|
| 1 gi (UK) | 0.0001858 yd³ |
| 2 gi (UK) | 0.0003716 yd³ |
| 3 gi (UK) | 0.0005574 yd³ |
| 4 gi (UK) | 0.0007433 yd³ |
| 5 gi (UK) | 0.0009291 yd³ |
| 6 gi (UK) | 0.001115 yd³ |
| 7 gi (UK) | 0.001301 yd³ |
| 8 gi (UK) | 0.001487 yd³ |
| 9 gi (UK) | 0.001672 yd³ |
| 10 gi (UK) | 0.001858 yd³ |
| 12 gi (UK) | 0.00223 yd³ |
| 15 gi (UK) | 0.002787 yd³ |
| 20 gi (UK) | 0.003716 yd³ |
| 25 gi (UK) | 0.004645 yd³ |
| 50 gi (UK) | 0.01 yd³ |
| 100 gi (UK) | 0.02 yd³ |
| 200 gi (UK) | 0.04 yd³ |
| 300 gi (UK) | 0.06 yd³ |
| 500 gi (UK) | 0.09 yd³ |
| 1000 gi (UK) | 0.19 yd³ |
| 2000 gi (UK) | 0.37 yd³ |
| 5000 gi (UK) | 0.93 yd³ |
| 10000 gi (UK) | 1.86 yd³ |
What is an imperial gill?
A quarter of an imperial pint, 142.0653125 ml exactly. It survives as the measure spirits were once poured by in British pubs, and in old recipes that ask for a gill of cream.
What is a cubic yard?
Twenty-seven cubic feet, or 764.55 litres. Concrete, topsoil and aggregate are all ordered by it in the US, and it is the unit a truck is measured in.
How many cubic yards are in an imperial gill?
One imperial gill is 1.8581 × 10^-4 cubic yards. Going the other way, one cubic yard is 5381.7138 imperial gills. Both figures come from the same defined relation rather than from a measurement, which is why they are the same today as they were in 1959.
Every volume unit here
The whole group — 20 units with their symbols and the size of each one in liters — is on the conversion index, along with every pair it makes. The table above already gives each of them relative to an imperial gill.
Cite this page
- APA
- Rule Calculator. (2026). Convert Imperial gills to cubic yards. Rule Calculator. https://rulecalculators.com/convert/imperial-gill-to-cubic-yard
- MLA
- "Convert Imperial gills to cubic yards." Rule Calculator, August 16, 2026, https://rulecalculators.com/convert/imperial-gill-to-cubic-yard.
- Chicago
- Rule Calculator. "Convert Imperial gills to cubic yards." Rule Calculator. Last reviewed August 16, 2026. https://rulecalculators.com/convert/imperial-gill-to-cubic-yard.
The date is when the figures on this page were last checked against their source, not the day you opened it. Add your own access date if your style needs one.
Questions people actually ask
- How many cubic yards are in an imperial gill?
- 1.8581 × 10^-4. Twenty-seven cubic feet, or 764.55 litres. Concrete, topsoil and aggregate are all ordered by it in the US, and it is the unit a truck is measured in.
- How do I convert cubic yards back to imperial gills?
- Divide by 1.8581 × 10^-4, or multiply by 5381.7138 — they are the same operation.
Other volume conversions
Cubic yards to imperial gills — the same conversion the other way.