Convert Imperial gills to Cubic feet
1 imperial gill is 0.01 ft³. One imperial gill is exactly 0.00501698916362 cubic feet.
One imperial gill is 0.0050169892 cubic feet. To convert imperial gills to cubic feet, multiply by 0.0050169892; to go the other way, divide by 0.0050169892 or multiply by 199.32273. The relation is exact but the figure is not: it is a rounding of a number that does not terminate, and it follows from NIST Handbook 130. A quarter of an imperial pint, 142.0653125 ml exactly.
Factor checked against the defining standard · How we check
- Imperial gills × 0.0050169892
1 * 0.0050170.005 ft³
1 imperial gill in every volume unit
| Unit | Value | Exact factor |
|---|---|---|
| US teaspoons | 28.82279821 tsp | × 28.8227982121 |
| US tablespoons | 9.607599404 tbsp | × 9.60759940404 |
| US fluid ounces | 4.803799702 fl oz | × 4.80379970202 |
| US cups | 0.6004749628 cup | × 0.600474962752 |
| US pints | 0.3002374814 pt | × 0.300237481376 |
| US quarts | 0.1501187407 qt | × 0.150118740688 |
| US gallons | 0.03752968517 gal | × 0.037529685172 |
| milliliters | 142.0653125 ml | × 142.0653125 |
| liters | 0.1420653125 L | × 0.1420653125 |
| imperial gallons | 0.03125 gal (UK) | × 0.03125 |
| imperial quarts | 0.125 qt (UK) | × 0.125 |
| imperial pints | 0.25 pt (UK) | × 0.25 |
| imperial fluid ounces | 5 fl oz (UK) | × 5 |
| imperial gills (as entered) | 1 gi (UK) | — |
| cubic millimetres | 142,065.3125 mm³ | × 142,065.3125 |
| cubic centimetres | 142.0653125 cm³ | × 142.0653125 |
| cubic inches | 8.669357275 in³ | × 8.66935727474 |
| cubic feet | 0.005016989164 ft³ | × 0.00501698916362 |
| cubic yards | 0.0001858144135 yd³ | × 0.000185814413467 |
| cubic metres | 0.0001420653125 m³ | × 0.0001420653125 |
Factors are entered by hand from NIST Handbook 130 rather than derived from a units library, so the ones that terminate are exact rather than rounded.
How do you convert imperial gills to cubic feet? The converter and the working
- 1.Take the measurement in imperial gills.
- 2.Multiply by 0.0050169892 — that is how many cubic feet fit in one imperial gill.
- 3.To go back the other way, divide by 0.0050169892, or multiply by 199.32273.
Worked example: 25 imperial gills to cubic feet
- Formula
- gi (UK) × 0.0050169892 = ft³
- Arithmetic
- 25 × 0.0050169892 = 0.13 ft³
- Answer
- 25 gi (UK) = 0.13 ft³
The factor is rounded for display; the figure above is computed from the full value.
Imperial gills to cubic feet conversion table
| Imperial gills | Cubic feet |
|---|---|
| 1 gi (UK) | 0.01 ft³ |
| 2 gi (UK) | 0.01 ft³ |
| 3 gi (UK) | 0.02 ft³ |
| 4 gi (UK) | 0.02 ft³ |
| 5 gi (UK) | 0.03 ft³ |
| 6 gi (UK) | 0.03 ft³ |
| 7 gi (UK) | 0.04 ft³ |
| 8 gi (UK) | 0.04 ft³ |
| 9 gi (UK) | 0.05 ft³ |
| 10 gi (UK) | 0.05 ft³ |
| 12 gi (UK) | 0.06 ft³ |
| 15 gi (UK) | 0.08 ft³ |
| 20 gi (UK) | 0.1 ft³ |
| 25 gi (UK) | 0.13 ft³ |
| 50 gi (UK) | 0.25 ft³ |
| 100 gi (UK) | 0.5 ft³ |
| 200 gi (UK) | 1 ft³ |
| 300 gi (UK) | 1.51 ft³ |
| 500 gi (UK) | 2.51 ft³ |
| 1000 gi (UK) | 5.02 ft³ |
| 2000 gi (UK) | 10.03 ft³ |
| 5000 gi (UK) | 25.08 ft³ |
| 10000 gi (UK) | 50.17 ft³ |
What is an imperial gill?
A quarter of an imperial pint, 142.0653125 ml exactly. It survives as the measure spirits were once poured by in British pubs, and in old recipes that ask for a gill of cream.
What is a cubic foot?
Exactly 28.316846592 litres, or 7.48 US gallons. The working unit of natural gas billing, air flow and refrigerator capacity in the US.
How many cubic feet are in an imperial gill?
One imperial gill is 0.0050169892 cubic feet. Going the other way, one cubic foot is 199.32273 imperial gills. Both figures come from the same defined relation rather than from a measurement, which is why they are the same today as they were in 1959.
Every volume unit here
The whole group — 20 units with their symbols and the size of each one in liters — is on the conversion index, along with every pair it makes. The table above already gives each of them relative to an imperial gill.
Cite this page
- APA
- Rule Calculator. (2026). Convert Imperial gills to cubic feet. Rule Calculator. https://rulecalculators.com/convert/imperial-gill-to-cubic-foot
- MLA
- "Convert Imperial gills to cubic feet." Rule Calculator, August 16, 2026, https://rulecalculators.com/convert/imperial-gill-to-cubic-foot.
- Chicago
- Rule Calculator. "Convert Imperial gills to cubic feet." Rule Calculator. Last reviewed August 16, 2026. https://rulecalculators.com/convert/imperial-gill-to-cubic-foot.
The date is when the figures on this page were last checked against their source, not the day you opened it. Add your own access date if your style needs one.
Questions people actually ask
- How many cubic feet are in an imperial gill?
- 0.0050169892. Exactly 28.316846592 litres, or 7.48 US gallons. The working unit of natural gas billing, air flow and refrigerator capacity in the US.
- How do I convert cubic feet back to imperial gills?
- Divide by 0.0050169892, or multiply by 199.32273 — they are the same operation.
Other volume conversions
Cubic feet to imperial gills — the same conversion the other way.