0.1 as a fraction
0.1 = 1/10.
Said aloud, this is the same phrase as a different number. Here the repeating block is 1 in one reading and 0.1 in the other, so the answers differ: 0.1 is 1/10, while 0.(1) is 1/9. Which one you meant depends on where the bar sits over the digits.
Checked by test against every decimal in this family · How we check
How it gets there
- Put the digits over their place value. 0.1 has 1 decimal place, so it is 1/10.
- Nothing divides both. 1 and 10 share no factor greater than one, so 1/10 is already in lowest terms — which is why this one looks like it has not been simplified.
Questions people actually ask
- What is half of 0.1?
- 1/20, or 0.05 as a decimal. Halving a fraction doubles the denominator rather than halving the top, unless the numerator is even and cancels. Doubled instead, 1/10 is 1/5 or 0.2.
- What is 0.1 as a fraction?
- 1/10, in lowest terms. 1/10 is the same value before reducing, and dividing both by 1 gets there.
- How do you convert 0.1 to a fraction step by step?
- Put the digits over their place value — 0.1 has 1 decimal place, so it is 1/10 — then divide both by their greatest common divisor, 1. That gives 1/10 and it cannot reduce further.
- Is 1/10 in simplest form?
- Yes. The numerator and denominator share no factor above 1, which is what simplest form means. 1/10 is the same number written before that reduction.
- What is 0.1 on a tape measure?
- It falls between marks. The nearest sixteenth is 1/8, which is off by about 0.63 mm on an inch — close enough for carpentry and not for machining.
- What is 1/10 as a decimal?
- 0.1. This page runs the conversion in the direction people ask for it, and dividing 1 by 10 runs it back the other way.
The same number, other ways
- Fraction, lowest terms
- 1/10
- Before reducing
- 1/10
- As a percentage
- 10%
- As a ratio
- 1:10
- Equivalent fractions
- 2/20, 3/30, 4/40, 5/50
- Nearest sixteenth on a tape
- 1/8 (nearest)
A tape measure only has sixteenths, so 0.1 does not land on a mark. The nearest one is 1/8, which is 0.400 of a sixteenth away — about 0.63 mm on an inch.
Work it out for any decimal
The two calculators this page is built from take any numbers you like: reduce a fraction shows the divisor it used, and fraction to decimal goes the other way, to the nearest 16th, 32nd and 64th.
Decimals either side
Cite this page
- APA
- Rule Calculator. (2026). 0.1 as a fraction. Rule Calculator. https://rulecalculators.com/fraction/0-1-as-a-fraction
- MLA
- "0.1 as a fraction." Rule Calculator, October 1, 2026, https://rulecalculators.com/fraction/0-1-as-a-fraction.
- Chicago
- Rule Calculator. "0.1 as a fraction." Rule Calculator. Last reviewed October 1, 2026. https://rulecalculators.com/fraction/0-1-as-a-fraction.
The date is when the figures on this page were last checked against their source, not the day you opened it. Add your own access date if your style needs one.